Using proper orthogonal decomposition to solve heat transfer process in a flat tube bank fin heat exchanger
Abstract view|378|times PDF download|201|times
Abstract
Proper orthogonal decomposition (POD) reduced-order model can save computing time by reducing the dimension of physical problems and reconstructing physical fields. It is especially suitable for large-scale complex problems in engineering, such as ground heat utilization, sea energy development, mineral exploitation, multiphase flow and flow and heat transfer with complex structure. In this paper, the POD reduced-order model was used to calculate the heat transfer in a flat tube bank fin heat exchanger. The calculating results of the finite volume method (FVM) were adopted as the snapshot samples. Singular value decomposition method was used to decompose the samples to obtain a series of bases and corresponding coefficients on sampling conditions. With these coefficients, interpolation method was used to calculate the coefficients on predicting conditions. And the physical field has been reconstructed using the bases and the interpolated coefficients directly. In the calculation of heat transfer unit of flat tube fin heat exchanger, air-side Reynolds number, transverse tube spacing and the fin spacing were chosen as the variables. The results obtained by the POD method are in good agreement with the results calculated by the FVM. Moreover, the POD reduced-order model presented in this paper is more advantageous in comparison with the FVM in terms of accuracy, suitability, and computational speed.
Cited as: Wang, Y., Xia, X., Wang, Y., et al. Using proper orthogonal decomposition to solve heat transfer process in a flat tube bank fin heat exchanger. Advances in Geo-Energy Research, 2017, 1(3): 158-170, doi: 10.26804/ager.2017.03.03
Keywords
Full Text:
PDFReferences
Agbossou, A., Souyri, B., Stutz, B. Modelling of helical coil heat exchangers for heat pump applications: Analysis of operating modes and distance between heat exchangers. Appl. Therm. Eng. 2018, 129: 1068-1078.
Aliabadi, M., Akbari, M., Hormozi, F. An empirical study on vortex-generator inset fitted in tubular heat exchanger with dilute Cu-water nanofluid flow. Chin. J. Chem. Eng. 2016, 24(6): 728-736.
Aquino, W. An object-oriented framework for reduced-order models using proper orthogonal decomposition (POD). Comput. Methods Appl. Mech. Eng. 2007, 196(41): 4375-4390.
Arora, A., Subbarao, P.M.V., Agarwal, R.S. Numerical optimization of location of ‘common flow up’ delta winglets for inline aligned finned tube heat exchangers. Appl. Therm. Eng. 2015, 82: 329-340.
Atam, E., Helsen, L. Ground-coupled heat pumps: Part 1-Literature review and research challenges in modeling and optimal control. Renewable Sustainable Energy Rev. 2016, 54: 1653-1667.
Bellocchi, S., Guizzi, L., Manno, M., et al. Reversible heat pump HVAC system with regenerative heat exchanger for electric vehicles: Analysis of its impact on driving range. Appl. Therm. Eng. 2018, 129: 290-305.
Brenner, T.A., Fontenot, R.L., Cizmas, P.G.A., et al. A reduced-order model for heat transfer in multiphase flow and practical aspects of the proper orthogonal decomposition. Comput. Chem. Eng. 2012, 43: 68-80.
Cao, Y.H., Zhu, J., Luo, Z.D., et al. Reduced-order modeling of the upper tropical pacific ocean model using proper orthogonal decomposition. Comput. Math. Appl. 2006, 52(8-9): 1373-1386.
Cao, Z.Z. Calculation of temperature field in POD method of hot oil pipeline. Beijing, China University of Petroleum, 2012. (in Chinese)
Capata, R., Beyene, A. Experimental evaluation of three different configurations of constructal disc-shaped heat exchangers. Int. J. Heat Mass Transf. 2017, 115: 92-101.
Cazemier, W., Verstappen, R.W.C.P., Veldman, A.E.P. Proper orthogonal decomposition and low-dimensional models for driven cavity flows. Phys. Fluids 1998, 10(7): 1685-1699.
Chen, Y.Q., Zhang, L.N., Zhao, B.B. Application of singular value decomposition (SVD) in extraction of gravity components indicating the deeply and shallowly buried granitic complex associated with tin polymetallic miner-alization in the Gejiu tin ore field, Southwestern China. J. Appl. Geophys. 2015, 123: 63-70.
Crommelinand, D.T., Majda, A.J. Strategies for model reduction: Comparing different optimal bases. J. Atmos. Sci. 2004, 61(17): 2306-2317.
Dezan, D., Salviano, L., Yanagihara, J. Heat transfer enhancement and optimization of flat-tube multilouvered fin compact heat exchangers with delta-winglet vortex generators. Appl. Therm. Eng. 2016, 101: 576-591.
Ding, P., Tao, W.Q. Reduced order modeling of fluid flow and heat transfer in tube-fin heat exchanger. Journal of China University of Petroleum (Edition of Natural Science) 2011, 35(2): 137-140. (in Chinese)
Fukunaga, K. Introduction to Statistical Recognition. Pitts-burgh, USA, Academic Press, 1990.
Gai, X.P., Wang, L.B., Lin, Z.M., et al. Effects of the fins conductivity on heat transfer performance of the bank plain fin heat exchangers. Journal of Lanzhou Jiaotong University 2010, 29(3): 55-61. (in Chinese)
Guo, K.P., Zhang, N., Smith, R. Design optimization of multi-stream plate fin heat exchangers with multiple fin types. Appl. Therm. Eng. 2017, 131: 30-40.
Han, D.X., Yu, B., Wang, Y., et al. Fast thermal simulation of a heated crude oil pipeline with a BFC-based POD reduced-order model. Appl. Therm. Eng. 2015, 88: 217-229.
Han, H., He, Y.L., Li, Y.S., et al. A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations. Int. J. Heat Mass Transf. 2013, 65: 686-695.
Hu, W.L., Su, M., Wang, L.B., et al. The optimum fin spacing of circle tube bank fin heat exchanger with vortex generators under the same front velocity. Heat Mass Transf. 2013, 49(9): 1271-1285.
Hu, W.L., Wang, L.B., Guan, Y. The effect of transverse tube pitch on the thermal-hydrodynamic performance of a circular tube-plate-fin heat exchanger with fin-mounted vortex generators. J. Enhanc. Heat Transf. 2015, 22(3): 221-246.
Jacobi, A.M., Shah, R.K. Air-side flow and heat transfer in compact heat exchangers: A discussion of enhancement mechanisms. Heat Transf. Eng. 1998, 19(4): 29-41.
Jolliffe, I.T. Principal Component Analysis. New York, USA, Springer, 2002.
Kylikof, U. The Cooling System of Diesel Locomotive. Moscow, Russian, Machine Construction Press, 1988.
(in Russian) Li, H.R., Luo, Z.D., Chen, J. Numerical simulation based on POD for two dimensional solute transport problems. Appl. Math. Model. 2011, 35(5): 2489-2498.
Li, K.J., Xue, W.P., Xu, C., et al. Optimization of ventilation system operation in office environment using POD model reduction and genetic algorithm. Energy Build. 2013, 67: 34-43.
Lin, Z.M., Liu, C.P., Wang, L.B. Numerical study of fluid flow and heat transfer enhancement of circular tube bank fin heat exchanger with curved delta-winglet vortex generators. Appl. Therm. Eng. 2015, 88: 198-210.
Lin, Z.M., Wang, L.B., Zhang, Y.H., et al. Numerical study on heat transfer enhancement of circular tube bank fin heat exchanger with interrupted annular groove fin. Appl. Therm. Eng. 2014, 73: 1465-1476.
Liu, C.P., Lin, Z.M., Wang, L.B. Thermal boundary conditions on the cross sections normal to the main flow of fully developed convection in the tube with insert tape. Numer. Heat Transf. Part A: Appl. 2014, 65(12): 1230-1253.
Liu, S., Wang, L.B., Fan, J.F., et al. Tube transverse pitch effect on heat/mass transfer characteristics of flat tube bank fin mounted with vortex generators. J. Heat Transf. 2008, 130(6): 064502.
Lizardi, J.J., Trevino, C., Mendez, F. The influence of the variable thermal conductivity of a vertical fin on a laminar-film condensation process. Heat Mass Transf. 2004, 40(5): 383-391.
Lumley, J.L. The structure of inhomogeneous turbulent flows, in Atmospheric Turbulence and Radio Wave Propagation, edited by A. M. Yaglom and V. I. Tatarski, Nauka, Moscow, pp. 166-178, 1967.
Luo, Z.D., Zhu, J., Wang, R., et al. Proper orthogonal decomposition approach and error estimation of mixed finite element methods for the tropical Pacific Ocean reduced gravity model. Comput. Methods Appl. Mech. Eng. 2007, 196(41): 4184-4195.
Mahapatra, P.S., Chatterjee, S., Mukhopadhyay, A., et al. Proper orthogonal decomposition of thermally-induced flow structure in an enclosure with alternately active localized heat sources. Int. J. Heat Mass Transf. 2016, 94: 373-379.
Majda, A.J., Timofeyev, I., Vanden-Eijnden, E. Systematic strategies for stochastic mode reduction in climate. J. Atmos. Sci. 2003, 60(14): 1705-1723.
Misevi ˇci ¯ut ˙e, V., Motuzien ˙e, V., Valan ˇcius, K. The application of the pinch method for the analysis of the heat exchangers network in a ventilation system of a building. Appl. Therm. Eng. 2018, 129: 772-781.
Mudunuru, M., Karra, S., Harp, D. Regression-based reduced-order models to predict transient thermal output for enhanced geothermal systems. Geothermics 2017, 70: 192-205.
Nair, H.C., Padmalal, D., Joseph, A., et al. Delineation of groundwater potential zones in river basins using geospatial tools-an example from southern Western Ghats, Kerala, India. J. Geovis. Spat. Anal. 2017, 1(1-2): 1-5.
Pearson, K. On lines and planes of closest fit to systems of points in space. Philos. Mag. 1901, 2(11): 559-572.
Polansky, J., Wang, M. Proper orthogonal decomposition as a technique for identifying two-phase flow pattern based on electrical impedance tomography. Flow Meas. Instrum. 2017, 53: 126-132.
Puragliesi, R., Leriche, E. Proper orthogonal decomposition of a fully confined cubical differentially heated cavity flow at Rayleigh number Ra = 109 . Comput. Fluids 2012, 61: 14-20.
Ren, Y.J. Numerical Analysis and Realization of Matlab. Beijing, Higher Education Press, 2008. (in Chinese)
Rosenfeld, A., Kak, A. Digital Picture Processing. New York, USA, Academic Press, 1982.
Salviano, L., Dezan, D., Yanagihara, J.I. Thermal-hydraulic performance optimization of inline and staggered fin-tube compact heat exchanger applying longitudinal vortex generators. Appl. Therm. Eng. 2016, 95: 311-329.
Singer, M.A., Green, W.H. Using adaptive proper orthogonal decomposition to solve the reaction-diffusion equation. Appl. Numer. Math. 2009, 59(2): 272-279.
Sirovich, L. Turbulent and dynamics of coherent structure: I-III. Q. Appl. Math. 1987, 45(3): 561-571.
Sivasakthivel, T., Philippe, M., Murugesan, K., et al. Exper-imental thermal performance analysis of ground heat exchangers for space heating and cooling applications. Renewable Energy 2017, 113: 1168-1181.
Song, K.W., Wang, Y., Wang, L.B., et al. Numerical study of the fin efficiency and a modified fin efficiency equation for flat tube bank fin heat exchanger. Int. J. Heat Mass Transf. 2011, 54(11): 2661-2672.
Song, K.W., Xi, Z.P., Su, M., et al. Effect of geometric size of curved delta winglet vortex generators and tube pitch on heat transfer characteristics of fin-tube heat exchanger. Exp. Therm. Fluid Sci. 2017, 82: 8-18.
V ¨alikangas, T., Singh, S., Sφ rensen, K., et al. Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. Int. J. Heat Mass Transf. 2018, 118: 602-616.
Wang, L.B., Lin, Z.M., Sun, K.J., et al. Transversal tube pitch effects on local heat transfer characteristics of the flat tube bank fin mounted vortex generators and their sensitivity to non-uniform temperature of the fin. Front. Energy Power Eng. Chin. 2010, 4(3): 333-345.
Wang, S.M., Jian, G.P., Tong, X., et al. Effects of spacing bars on the performance of spiral-wound heat exchanger and the fitting of empirical correlations. Appl. Therm. Eng. 2018, 128: 1351-1358.
Wang, Y., Wang, L.C., Lin, Z.M., et al. The condition requiring conjugate numerical method in study of heat transfer characteristics of tube bank fin heat exchanger. Int. J. Heat Mass Transf. 2012a, 55(9): 2353-2364.
Wang, Y., Yu, B., Cao, Z.Z., et al. A comparative study of POD interpolation and POD projection methods for fast and accurate prediction of heat transfer problems. Int. J. Heat Mass Transf. 2012b, 55(17): 4827-4836.
Wang, Y., Yu, B., Sun, S.Y. Fast prediction method for steady-state heat convection. Chem. Eng. Technol. 2012c, 35(4): 668-678.
Wang, Y., Yu, B., Wu, X., et al. POD study on the mechanism of turbulent drag reduction and heat transfer reduction based on direct numerical simulation. Prog. Comput. Fluid Dyn. 2011, 11(3/4): 149-159.
Wang, Y., Yu, B., Wu, X., et al. POD and wavelet analyses on the flow structures of a polymer drag-reducing flow based on DNS data. Int. J. Heat Mass Transf. 2012d, 55(17): 4849-4861.
Wei, X.Q., Zhang, Y.H., Hu, W.L., et al. The fluid flow and heat transfer characteristics in the channel formed by flat tube and dimpled fin. Int. J. Therm. Sci. 2016, 104: 86-100.
Yang, J.C., Li, F.C., Cai, W.H., et al. On the mechanism of convective heat transfer enhancement in a turbulent flow of nanofluid investigated by DNS and analyses of POD and FSP. Int. J. Heat Mass Transf. 2014, 78: 277-288.
Zhang, X.H., Xiang, H. A fast meshless method based on proper orthogonal decomposition for the transient heat conduction problems. Int. J. Heat Mass Transf. 2015, 84: 729-739.
Refbacks
- There are currently no refbacks.
Copyright (c) 2017 The Author(s)
![Creative Commons License](http://licensebuttons.net/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.