Numerical simulation and thermo-hydro-mechanical coupling model of in situ mining of low-mature organic-rich shale by convection heating
Abstract view|0|times PDF download|0|times
Abstract
The in situ efficient exploitation of low-mature organic-rich shale resources is critical for alleviating the current oil shortage. Convection heating is the most critical and feasible method for in situ retortion of shale. In this study, a thermo-hydro-mechanical coupling mathematical model for in situ exploitation of shale by convection heating is developed. The dynamic distribution of the temperature, seepage, and stress fields during the in situ heat injection of shale and the coupling effect between multiple physical fields are studied. When the operation time increases from 1 to 2.5 years, the temperature of most shale formations between heat injection and production wells increases significantly (from less than 400 to 500 °C), which is a period of significant production of shale oil and pyrolysis gas. The fluid pore pressure gradually decreases from the peak point of the heat injection well to the surrounding. Compared with shale formation, bedrock permeability is poor, pore pressure increases slowly, and a lag phenomenon exists. The pore pressure difference between bedrock and shale is minimal by 1 year. When the heat injection time is 2.5 years, the permeability coefficient of shale formation in the area from the heat injection well to the production wells increases nearly 100 times the initial permeability coefficient. With increasing formation temperature, the vertical stress gradually evolves from compressive stress to tensile stress. Meanwhile, the action area of tensile stress expands outward with time with the heat injection well as the center. In general, increasing tensile stress enlarges the pore volume. It extends the fracture width, creating favorable conditions for the injection of high-temperature fluids and the production of oil and gas.
Cited as: Zhao, J., Wang, L., Liu, S., Kang, Z., Yang, D., Zhao, Y. Numerical simulation and thermo-hydro-mechanical coupling model of in situ mining of low-mature organic-rich shale by convection heating. Advances in Geo-Energy Research, 2022, 6(6): 502-514. https://doi.org/10.46690/ager.2022.06.07
Keywords
Full Text:
PDFReferences
Akinlua, A., Smith, R. M. High temperature steam extraction for the determination of aliphatic hydrocarbons in petroleum source rock. Chromatographia, 2009, 69(11): 1333-1339.
Avraam, D. G., Payatakes, A. C. Flow regimes and relative permeabilities during steady-state two-phase flow in porous media. Journal of Fluid Mechanics, 1995, 293: 207-236.
Bansal, V. R., Kumar, R., Sastry, M. I. S., et al. Direct estimation of shale oil potential by the structural insight of Indian origin kerogen. Fuel, 2019, 241: 410-416.
Biot, M. A. General theory of three-dimensional consolidation. Journal of Applied Physics, 1941, 12: 144-164.
Gelet, R., Loret, B., Khalili, N. Borehole stability analysis in a thermoporoelastic dual-porosity medium. International Journal of Rock Mechanics and Mining Sciences, 2012, 50: 65-76.
Kang, Z., Zhao, Y., Yang, D. Review of oil shale in-situ conversion technology. Applied Energy, 2020, 269: 115121.
Kelkar, S., Lewis, K., Karra, S., et al. A simulator for modeling coupled thermo-hydro-mechanical processes in subsurface geological media. International Journal of Rock Mechanics and Mining Sciences, 2014, 70: 569-580.
Li, H., Pan, C., Miller, C. T. Pore-scale investigation of viscous coupling effects for two-phase flow in porous media. Physical Review E, 2005, 72(2): 026705.
Liang, W., Zhao, Y., Liu, J., et al. Advances in in-situ modified mining by fluidization and in unconventional geomechanics. Advances in Geo-Energy Research, 2021, 5(1): 1-4.
Lin, L., Lai, D., Guo, E., et al. Oil shale pyrolysis in indirectly heated fixed bed with metallic plates of heating enhancement. Fuel, 2016, 163: 48-55.
Montgomery, W., Court, R. W., Rees, A. C., et al. High temperature reactions of water with heavy oil and bitumen: Insights into aquathermolysis chemistry during steam-assisted recovery. Fuel, 2013, 113: 426-434.
Nur, A., Byerlee, J. D. An exact effective stress law for elastic deformation of rock with fluids. Journal of Geophysical Research, 1971, 76(26): 6414-6419.
Pei, S., Wang, Y., Zhang, L., et al. An innovative nitrogen injection assisted in-situ conversion process for oil shale recovery: Mechanism and reservoir simulation study. Journal of Petroleum Science and Engineering, 2018, 171: 507-515.
Raeini, A. Q., Blunt, M. J., Bijeljic, B. Modelling two-phase flow in porous media at the pore scale using the volumeof-fluid method. Journal of Computational Physics, 2012, 231(17): 5653-5668.
Rao, X., Xu, Y., Liu, D., et al. A general physics-based data-driven framework for numerical simulation and history matching of reservoirs. Advances in Geo-Energy Research, 2021, 5(4): 422-436.
Saif, T., Lin, Q., Gao, Y., et al. 4D in situ synchrotron X-ray tomographic microscopy and laser-based heating study of oil shale pyrolysis. Applied Energy, 2019, 235: 1468-1475.
Salimzadeh, S., Paluszny, A., Nick, H. M., et al. A three-dimensional coupled thermo-hydro-mechanical model for deformable fractured geothermal systems. Geothermics, 2018, 71: 212-224.
Saurel, R., Abgrall, R. A multiphase Godunov method for compressible multifluid and multiphase flows. Journal of Computational Physics, 1999, 150(2): 425-467.
Shabdirova, A., Minh, N. H., Zhao, Y. A sand production prediction model for weak sandstone reservoir in Kazakhstan. Journal of Rock Mechanics and Geotechnical Engineering, 2019, 11(4): 760-769.
Suganuma, S., Katada, N. Innovation of catalytic technology for upgrading of crude oil in petroleum refinery. Fuel Processing Technology, 2020, 208: 106518.
Sultana, K., Rahman, M. T., Habib, K., et al. Recent advances in deep eutectic solvents as shale swelling inhibitors: A comprehensive review. ACS Omega, 2022, 7(33): 28723-28755.
Sun, Y., Kang, S., Wang, S., et al. Subcritical water extraction of Huadian oil shale at 300 °C. Energy & Fuels, 2019, 33(3): 2106-2114.
Sun, X., Xu, B., Qian, G., et al. The application of geomechanical SAGD dilation startup in a Xinjiang oil field heavy-oil reservoir. Journal of Petroleum Science and Engineering, 2021, 196: 107670.
Tong, F., Jing, L., Zimmerman, R. W. A fully coupled thermohydro-mechanical model for simulating multiphase flow, deformation and heat transfer in buffer material and rock masses. International Journal of Rock Mechanics and Mining Sciences, 2010, 47(2): 205-217.
Wang, G., Liu, S., Yang, D., et al. Numerical study on the insitu pyrolysis process of steeply dipping oil shale deposits by injecting superheated water steam: A case study on Jimsar oil shale in Xinjiang, China. Energy, 2022, 239: 122182.
Wang, G., Yang, D., Kang, Z., et al. Numerical investigation of the in situ oil shale pyrolysis process by superheated steam considering the anisotropy of the thermal, hydraulic, and mechanical characteristics of oil shale. Energy & Fuels, 2019, 33(12): 12236-12250.
Wang, L., Yang, D., Kang, Z. Evolution of permeability and mesostructure of oil shale exposed to high-temperature water vapor. Fuel, 2021, 290: 119786.
Wang, L., Zhao, Y. S., Yang, D. Investigation on meso-characteristics of in-situ pyrolysis of oil shale by injecting steam. Chinese Journal of Rock Mechanics and Engineering, 2020, 39(8): 1634-1647. (in Chinese)
War, K., Arnepalli, D. N. A review on coupled phenomena in aquifers from the perspective of geological storage of carbon dioxide with ecological significance. Building Materials for Sustainable and Ecological Environment, 2021: 135-149.
Wei, X., Feng, Z., Zhao, Y. Numerical simulation of thermohydro-mechanical coupling effect in mining fault-mode hot dry rock geothermal energy. Renewable Energy, 2019, 139: 120-135.
Wilkins, A., Green, C. P., Ennis-King, J. An open-source multiphysics simulation code for coupled problems in porous media. Computers & Geosciences, 2021, 154: 104820.
Wopara, O. F. Geochemical properties of shale gas reservoirs and their impacts on gas development: A review. International Journal of Multidisciplinary and Current Educational Research (IJMCER), 2021, 3(2): 154-165.
Yang, D., Wang, G., Kang, Z., et al. Experimental investigation of anisotropic thermal deformation of oil shale under high temperature and triaxial stress based on mineral and micro-fracture characteristics. Natural Resources Research, 2020, 29(6): 3987-4002.
Yang, D., Wang, L., Zhao, Y., et al. Investigating pilot test of oil shale pyrolysis and oil and gas upgrading by water vapor injection. Journal of Petroleum Science and Engineering, 2021, 196: 108101.
Yang, D., Zhao, Y., Kang, Z. Numerical simulation of in situ exploitation of oil shale by injecting high-temperature steam. Oil Shale, 2019, 36(4): 483-500.
Zhao, Y. S., Feng, Z. C., Yang, D., et al. The method for mining oil & gas from oil shale by Convection heating. CN200510012473, 2005.
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.