Advances and challenges in foam stability: Applications, mechanisms, and future directions
Abstract view|79|times PDF download|25|times
Abstract
Foam has wide applications in oil and gas resource development, environmental engineering, and chemical industries due to its favorable rheological properties and interfacial characteristics. However, foam stability is influenced by a complex interplay of external and intrinsic factors, including surfactant type, gas-to-liquid ratio, temperature, and pressure. The combined effects of these factors can significantly alter foam characteristics, with each influencing the other in ways that can either enhance or destabilize foam. This research investigates these factors in detail, exploring how they interact to impact foam stability and how their optimization can enhance foam performance for various applications. The study delves into the role of interfacial tension in foam stability, highlighting how surfactant properties, gas composition, and liquid characteristics contribute to foam formation and stability. The study also reviews advancements in foam technology, particularly in oil production, CO2 storage, environmental pollution management, and the creation of novel materials, while examining strategies for boosting foam stability under extreme conditions. Findings indicate that the gas-to-liquid ratio, surfactant type, temperature, and pressure all play key roles in foam stability, and fine-tuning these parameters can lead to significant improvements in foam performance. In harsh environments, maintaining foam stability presents substantial challenges. This research further proposes methods to enhance foam stability. Foam technology demonstrates broad potential in fields like oil recovery and wastewater treatment, where optimized foam stability can improve both reservoir recovery and treatment efficiency. This review summarizes the latest advancements in foam stability research, providing valuable insights for the further development of foam technology.
Document Type: Invited review
Cited as: Wang, Z., Li, S., Xu, Z., Aryana, S. A., Cai, J. Advances and challenges in foam stability: Applications, mechanisms, and future directions. Capillarity, 2025, 15(3): 58-73. https://doi.org/10.46690/capi.2025.06.02
Keywords
Full Text:
PDFReferences
Abdelgawad, K. Z., Adebayo, A. R., Isah, A., et al. A literature review of strength and stability of foam and their relationship with the absolute permeability of porous media. Journal of Petroleum Science and Engineering, 2022, 211: 110195.
Agwu, O. E., Akpabio, J. U., Alabi, S. B., et al. Artificial intelligence techniques and their applications in drilling fluid engineering: A review. Journal of Petroleum Science and Engineering, 2018, 167: 300-315.
Aronson, A., Bergeron, V., Fagan, M. E., et al. The influence of disjoining pressure on foam stability and flow in porous media. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 1994, 83(2): 109-120.
Aryana, S. A., Barclay, C., Liu, S. North cross devonian unita mature continuous CO2 flood beyond 200% HCPV injection. Paper SPE 170653 Presented at SPE Annual Technical Conference and Exhibition, Amsterdam, The Netherlands, 27-29 October, 2014.
Aryana, S. A., Kovscek, A. R. Experiments and analysis of drainage displacement processes relevant to carbon dioxide injection. Physical Review E-Statistical, Nonlinear, and Soft Matter Physics, 2012, 86(6): 066310.
Audebert, A., Beaufils, S., Lechevalier, V., et al. How foam stability against drainage is affected by conditions of prior whey protein powder storage and dry-heating: A multidimensional experimental approach. Journal of Food Engineering, 2019, 242: 153-162.
Bathe, G. A., Bhagat, M. S., Chaudhari, B. L. Comparative investigation of dynamic foam behavior of air–water and CO2–water systems. Journal of Surfactants and Detergents, 2018, 21(3): 409-419.
Berry, J. D., Neeson, M. J., Dagastine, R. R., et al. Measurement of surface and interfacial tension using pendant drop tensiometry. Journal of Colloid and Interface Science, 2015, 454: 226-237.
Bertin, H. H., Kovscek, A. R. Foam Mobility in Heterogeneous Porous Media. I: Scaling Concepts. Transport Porous Media, 2003, 52(1): 17-35.
Bhaskaran, A., Sharma, D., Roy, S., et al. Technological solutions for nox, sox, and voc abatement: Recent breakthroughs and future directions. Environmental Science and Pollution Research, 2023, 30(40): 91501-91533.
Bhatt, S., Saraf, S., Bera, A. Perspectives of foam generation techniques and future directions of nanoparticle-stabilized CO2 foam for enhanced oil recovery. Energy & Fuels, 2023, 37(3): 1472-1494.
Cai, J., Jin, T., Kou, J., et al. Lucas–Washburn equation-based modeling of capillary-driven flow in porous systems. Langmuir 2021, 37(5): 1623-1636.
Chattopadhyay, D. K., Webster, D. C. Thermal stability and flame retardancy of polyurethanes. Progress in Polymer Science, 2009, 34(10): 1068-1133.
Chaudhry, A. U., Muneer, R., Lashari, Z. A., et al. Recent advancements in novel nanoparticles as foam stabilizer: Prospects in EOR and CO2 sequestration. Journal of Molecular Liquids, 2024, 407: 125209.
Chen, H., Luo, M., Zhang, W., et al. Ultra-low-density drilling fluids for low-pressure coefficient formations: Synergistic effects of surfactants and hollow glass microspheres. Processes, 2023, 11(7): 2129.
Chen, J., He, L., Luo, X., et al. Foaming of crude oil: Effect of acidic components and saturation gas. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018, 553: 432-438.
Chowdhury, S., Shrivastava, S., Kakati, A., et al. Comprehensive review on the role of surfactants in the chemical enhanced oil recovery process. Industrial & Engineering Chemistry Research, 2022, 61(1): 21-64.
Claesson, P. M., Ederth, T., Bergeron, V., et al. Techniques for measuring surface forces. Advances in Colloid and Interface Science, 1996, 67: 119-183.
Dang-Vu, T., Hupka, J. Characterization of porous materials by capillary rise method. Physicochemical Problems of Mineral Processing, 2005, 39: 47-65.
Daniel, D., Vuckovac, M., Backholm, M., et al. Probing surface wetting across multiple force, length and time scales. Communications Physics, 2023, 6(1): 152.
Das, R., Hoysall, C., Rao, L. Insights on foaming in surface waters: A review of current understandings and future directions. Chemical Engineering Journal, 2024, 493: 152472.
Davarpanah, A., Mirshekari, B. Numerical simulation and laboratory evaluation of alkali–surfactant–polymer and foam flooding. International Journal of Environmental Science and Technology, 2020, 17(2): 1123-1136.
Derikvand, Z., Riazi, M. Experimental investigation of a novel foam formulation to improve foam quality. Journal of Molecular Liquids, 2016, 224: 1311-1318.
Drelich, J., Fang, C., White, C. Measurement of interfacial tension in fluid-fluid systems. Encyclopedia of Surface and Colloid Science, 2002, 3: 3158-3163.
Du, D., Li, Y., Chao, K., et al. Laboratory study of the non-newtonian behavior of supercritical CO2 foam flow in a straight tube. Journal of Petroleum Science and Engineering, 2018, 164: 390-399.
Du, Y., Huang, Y., Wang, W., et al. Application and development of foam extraction technology in wastewater treatment: A review. Science of The Total Environment, 2024, 930: 172755.
Ellman, M., Midoux, N., Wild, G., et al. A new, improved liquid hold-up correlation for trickle-bed reactors. Chemical Engineering Science, 1990, 45(7): 1677-1684.
Esfandiarian, A., Maghsoudian, A., Davarpanah, A., et al. Developing a novel procedure in utilizing pendant drop method for determination of ultra-low interfacial tension and surface tension in near-miscibility conditions. Journal of Petroleum Science and Engineering, 2022, 215: 110607.
Farajzadeh, R., Andrianov, A., Krastev, R., et al. Foam-oil interaction in porous media: Implications for foam assisted enhanced oil recovery. Paper SPE 154197 Presented at SPE EOR Conference at Oil and Gas West Asia, Muscat, Oman, 16-18 April, 2012.
Feller, S. E., Zhang, Y., Pastor, R. W. Computer simulation of liquid/liquid interfaces. Ii. Surface tension-area dependence of a bilayer and monolayer. The Journal of Chemical Physics, 1995, 103(23): 10267-10276.
Fern, M. A., Gauteplass J, Pancharoen M, et al. Experimental study of foam generation, sweep efficiency, and flow in a fracture network. SPE Journal, 2016, 21(4): 1140-1150.
Fujii, S., Yusa, S. i., Nakamura, Y. Stimuli-responsive liquid marbles: Controlling structure, shape, stability, and motion. Advanced Functional Materials, 2016, 26(40): 7206-7223.
Garrouch, A. A., Jennings Jr, A. R. A contemporary approach to carbonate matrix acidizing. Journal of Petroleum Science and Engineering, 2017, 158: 129-143.
Gong, C., Zhao, T., Zhao, Y., et al. Effects of oxyethylene groups on the adsorption behavior and application performance of long alkyl chain phosphate surfactants. Journal of Molecular Liquids, 2022, 345: 117044.
Gonzenbach, U. T., Studart, A. R., Tervoort, E., et al. Ultrastable particle-stabilized foams. Angewandte Chemie International Edition, 2006, 45(21): 3526-3530.
Gowida, A., Elkatatny, S., Ibrahim, A. F. Impact of ecofriendly drilling additives on foaming properties for sustainable underbalanced foam drilling applications. ACS Omega, 2024, 9(6): 6719-6730.
Guo, F., Aryana, S. An experimental investigation of nanoparticle-stabilized CO2 foam used in enhanced oil recovery. Fuel, 2016, 186: 430-442.
Guo, F., Aryana, S. A., Wang, Y., et al. Enhancement of storage capacity of CO2 in megaporous saline aquifers using nanoparticle-stabilized CO2 foam. International Journal of Greenhouse Gas Control, 2019, 87:134-141.
Guo, F., He, J., Johnson, P. A. et al. Stabilization of CO2 foam using by-product fly ash and recyclable iron oxide nanoparticles to improve carbon utilization in EOR processes. Sustainable Energy & Fuels, 2017, 1(4): 814-822.
Guo, F., Aryana, S. A. Improved sweep efficiency due to foam flooding in a heterogeneous microfluidic device. Journal of Petroleum Science and Engineering, 2018, 164: 155163.
Guo, F., Aryana, S. A. An experimental investigation of flow regimes in imbibition and drainage using a microfluidic platform. Energies, 2019, 12(7): 1390.
Gupta, A. K., Banerjee, P., Mishra, A. Effect of frothers on foamability, foam stability, and bubble size. Coal Preparation, 2007, 27(1-3): 107-125.
Hanamertani, A. S., Pilus, R. M., Manan, N. A., et al. Ionic liquid application in surfactant foam stabilization for gas mobility control. Energy & Fuels, 2018, 32(6): 65456556.
Hansen, F., Rødsrud, G. Surface tension by pendant drop: I. A fast standard instrument using computer image analysis. Journal of Colloid and Interface Science, 1991, 141(1): 1-9.
Hosseini, H., Tsau, J. S., Wasserbauer, J., et al. Synergistic foam stabilization and transport improvement in simulated fractures with polyelectrolyte complex nanoparticles: Microscale observation using laser etched glass micromodels. Fuel, 2021, 301: 121004.
Hunter, T. N., Pugh, R. J., Franks, G. V., et al. The role of particles in stabilising foams and emulsions. Advances in Colloid and Interface Science, 2008, 137(2): 57-81.
Hunter, T. N., Wanless, E. J., Jameson, G. J., et al. Nonionic surfactant interactions with hydrophobic nanoparticles: Impact on foam stability. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2009, 347(13): 81-89.
Inagaki, M., Qiu, J., Guo, Q. Carbon foam: Preparation and application. Carbon, 2015, 87: 128-152.
Issakhov, M., Shakeel, M., Pourafshary, P., et al. Hybrid surfactant-nanoparticles assisted CO2 foam flooding for improved foam stability: A review of principles and applications. Petroleum Research, 2022, 7(2): 186-203.
Jacob, C., Buffard, A., Pioch, S., et al. Marine ecosystem restoration and biodiversity offset. Ecological Engineering, 2018, 120: 585-594.
Jin, F. -L., Zhao, M., Park, M., et al. Recent trends of foaming in polymer processing: A review. Polymers, 2019, 11(6): 953.
Kabalnov, A. Ostwald ripening and related phenomena. Journal of Dispersion Science and Technology, 2001, 22(1): 1-12.
Karim, N. A., Alias, M. S., Yang, H. Recent developments for the application of 3d structured material nickel foam and graphene foam in direct liquid fuel cells and electrolyzers. Catalysts, 2021, 11(2): 279.
Kim, B., Liu, Y., Llamas, I., et al. Simulation of bubbles in foam with the volume control method. ACM Transactions on Graphics, 2007, 26(3): 98-es.
Kim, H. -J., Seo, Y. Effect of surface modification on the interfacial tension between the melts of high-density polyethylene and nylon 66: Correlation between rheology and morphology. Langmuir, 2003, 19(7): 2696-2704.
Kim, H., Lim, J.-H., Lee, K., et al. Direct measurement of contact angle change in capillary rise. Langmuir, 2020, 36(48): 14597-14606.
Kumar, S., Mandal, A. Investigation on stabilization of co2 foam by ionic and nonionic surfactants in presence of different additives for application in enhanced oil recovery. Applied Surface Science, 2017, 420: 9-20.
Lai, N., Yuan, L., Li, W., et al. Research on the properties of natural gas foamed gel as a profile control and an oil displacement agent in strong heterogeneous reservoirs. Energy & Fuels, 2021, 35(9): 7738-7755.
Langevin, D. Influence of interfacial rheology on foam and emulsion properties. Advances in Colloid and Interface Science, 2000, 88(1-2): 209-222.
Larmignat, S., Vanderpool, D., Lai, H. K., et al. Rheology of colloidal gas aphrons (microfoams). Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2008, 322(1-3): 199-210.
Li, S., Li, Z., Sun, X. Effect of flue gas and n-hexane on heavy oil properties in steam flooding process. Fuel, 2017, 187: 84-93.
Liu, P., Yang, R., Yu, A. Dynamics of wet particles in rotating drums: Effect of liquid surface tension. Physics of Fluids, 2011, 23(1): 013304.
Liu, X., Sathishkumar, K., Zhang, H., et al. Frontiers in environmental cleanup: Recent advances in remediation of emerging pollutants from soil and water. Journal of Hazardous Materials Advances, 2024, 16: 100461.
Magrabi, S., Dlugogorski, B., Jameson, G. Bubble size distribution and coarsening of aqueous foams. Chemical Engineering Science, 1999, 54(18): 4007-4022.
Majeed, T., Kamal, M. S., Zhou, X., et al. A review on foam stabilizers for enhanced oil recovery. Energy & Fuels, 2021, 35(7): 5594-5612.
Majeed, T., Sølling, T. I., Kamal, M. S. Foamstability: The interplay between salt-, surfactant-and critical micelle concentration. Journal of Petroleum Science and Engineering, 2020, 187: 106871.
Malysa, K., Krasowska, M., Krzan, M. Influence of surface active substances on bubble motion and collision with various interfaces. Advances in Colloid and Interface Science, 2005, 114: 205-225.
Minakov, A. V., Pryazhnikov, M. I., Neverov, A. L., et al. Wettability, interfacial tension, and capillary imbibition of nanomaterial-modified cross-linked gels for hydraulic fracturing. Capillarity, 2024, 12(2): 27-40.
Mirchi, V., Saraji, S., Goual, L., et al. Dynamic interfacial tension and wettability of shale in the presence of surfactants at reservoir conditions. Fuel, 2015, 148: 127-138.
Mohammadi, S., Afifi, H., Mahmoudi Alemi, F. Review on enhancing rheological characteristics of viscoelastic surfactant fracturing fluids by nanoparticles: Advances, challenges, and perspectives. Energy & Fuels, 2024, 38(6): 4921-4945.
Mohd Sabee, M. M. S., Itam, Z., Beddu, S., et al. Flame retardant coatings: Additives, binders, and fillers. Polymers, 2022, 14(14): 2911.
Moradpour, N., Yang, J., Tsai, P. A. Liquid foam: Fundamentals, rheology, and applications of foam displacement in porous structures. Current Opinion in Colloid & Interface Science, 2024, 74: 101845.
Mulligan, C. N., Wang, S. Remediation of a heavy metalcontaminated soil by a rhamnolipid foam. Engineering Geology, 2006, 85(1-2): 75-81.
Orujov, A., Abedi, B., Wawrousek, K., et al. Bionanocrystal Stabilized Biosurfactant Foams for Groundwater and Soil Remediation. InterPore Journal, 2025, 2(1): IPJ260225–5.
Orujov, A., Pikal, J. M., Chien, T., et al. Magnetic nanoparticle detection methods in the context of complex fluids. International Journal of Coal Science & Technology, 2024, 11(1): 86.
Osei-Bonsu, K., Shokri N, Grassia P. Foam stability in the presence and absence of hydrocarbons: From bubble to bulk-scale. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015, 481: 514-526.
Peng, Y., Yuan, X., Jiang, L., et al. The fabricating methods, properties and engineering applications of foamed concrete with polyurethane: A review. International Journal of Environmental Science and Technology, 2023, 20(2): 2293-2312.
Popinet, S. Numerical models of surface tension. Annual Review of Fluid Mechanics, 2018, 50(1): 49-75.
Prasad, S. K., Sangwai, J. S., Byun, H.-S. A review of the supercritical CO2 fluid applications for improved oil and gas production and associated carbon storage. Journal of CO2 Utilization, 2023, 72: 102479.
Rezaei, A., Derikvand, Z., Parsaei, R., et al. Surfactant-silica nanoparticle stabilized N2-foam flooding: A mechanistic study on the effect of surfactant type and temperature. Journal of Molecular Liquids, 2021, 325: 115091.
Rognmo, A. U., Al-Khayyat N, Heldal S, et al. Performance of silica nanoparticles in CO2 foam for EOR and CCUS at tough reservoir conditions. SPE Journal, 2020, 25(1): 406-415.
Rossen, W. R., Farajzadeh, R., Hirasaki, G. J., et al. Potential and challenges of foam-assisted CO2 sequestration. Geoenergy Science and Engineering, 2024, 239: 212929.
Saad, S. M., Policova, Z., Neumann, A. W. Design and accuracy of pendant drop methods for surface tension measurement. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011, 384(1-3): 442-452.
Shojaei, M. J., Méheust, Y., Osman, A, et al. Combined effects of nanoparticles and surfactants upon foam stability. Chemical Engineering Science, 2021, 238: 116601.
Song, B., Springer, J. Determination of interfacial tension from the profile of a pendant drop using computer-aided image processing: 1. Theoretical. Journal of Colloid and Interface Science, 1996, 184(1): 64-76.
Song, G., Meng, Y., Zhang, C., et al. Comprehensive review of the determination and reduction of the minimum miscibility pressure during CO2 flooding. ACS Omega, 2024, 9(13): 14747-14765.
Sorbie, K. S., Clifford, P. J., Jones, E. R. W. The rheology of pseudoplastic fluids in porous media using network modeling. Journal of Colloid and Interface Science, 1989, 130(2): 508-534.
Sugden, S. CLXXV.—the determination of surface tension from the rise in capillary tubes. Journal of the Chemical Society, Transactions, 1921, 119: 1483-1492.
Sun, H., Wang, Z., Sun, Y., et al. Laboratory evaluation of an efficient low interfacial tension foaming agent for enhanced oil recovery in high temperature flue-gas foam flooding. Journal of Petroleum Science and Engineering, 2020, 195: 107580.
Sun, L., Sun, X.-H., Zhang, Y.-C., et al. Stability of high salinity-enhanced foam: Surface behavior and thin-film drainage. Petroleum Science, 2023, 20(4): 2343-2353.
Sun, Y., Liu, Y., Chen, J., et al. Physical pretreatment of petroleum refinery wastewater instead of chemicals addition for collaborative removal of oil and suspended solids. Journal of Cleaner Production, 2021, 278: 123821.
Tan, P. J., Reid, S. R., Harrigan, J. J., et al. Dynamic compressive strength properties of aluminium foams. Part i—experimental data and observations. Journal of the Mechanics and Physics of Solids, 2005, 53(10): 21742205.
Tangparitkul, S., Sukee, A., Jiang, J., et al. Role of interfacial tension on wettability-controlled fluid displacement in porous rock: A capillary-dominated flow and how to control it. Capillarity, 2023, 9(3): 55-64.
Tran, N. P., Nguyen, T. N., Ngo, T. D., et al. Strategic progress in foam stabilisation towards high-performance foam concrete for building sustainability: A state-of-the-art review. Journal of Cleaner Production, 2022, 375: 133939.
Vu, K. A., Mulligan, C. N. An overview on the treatment of oil pollutants in soil using synthetic and biological surfactant foam and nanoparticles. International Journal of Molecular Sciences, 2023, 24(3): 1916.
Wang, J., Cao, Y., Li, G., et al. Effect of ctab concentration on foam properties and discussion based on liquid content and bubble size in the foam. International Journal of Oil, Gas and Coal Engineering, 2018, 6(1): 18-24.
Wang, X., Ren L, Long T, et al. Migration and remediation of organic liquid pollutants in porous soils and sedimentary rocks: A review. Environmental Chemistry Letters, 2023, 21(1): 479-496.
Wang, Z., Li, S., Jin, Z., et al. Oil and gas pathway to net-zero: Review and outlook. Energy Strategy Reviews, 2023a, 45: 101048.
Wang, Z., Li, S., Peng, D., et al. The effect of interfacial tension on CO2 oil-based foam stability under different temperatures and pressures. Fuel, 2023b, 341: 127755.
Wang, Z., Wang, C., Gao, Y., et al. Porous thermal insulation polyurethane foam materials. Polymers, 2023c, 15(18): 3818.
Weaire, D. L., Hutzler, S. The physics of foams. Physics Today, 2001, 54(3): 54.
Wei, P., Zhai, K., Guo, K., et al. Highly viscous liquid foam for oil-displacement: Surface & phase behavior enhancement. Journal of Petroleum Science and Engineering, 2022, 212: 110274.
Wilde, P., Clark, D. Foam formation and stability. Methods of Testing Protein Functionality, 1996, 1: 110-152.
Xu, L., Rad, M. D., Telmadarreie, A., et al. Synergy of surface-treated nanoparticle and anionic-nonionic surfactant on stabilization of natural gas foams. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018, 550: 176-185.
Xu, M., Guo, F., Bao, X., et al. Study on the strengthening mechanism of a mibc–peg mixed surfactant on foam stability. ACS Omega, 2023, 8(30): 27429-27438.
Xu, X., Saeedi, A., Liu, K. Laboratory studies on CO2 foam flooding enhanced by a novel amphiphilic ter-polymer. Journal of Petroleum Science and Engineering, 2016, 138: 153-159.
Yang, G., Du, B., Fan, L. Bubble formation and dynamics in gas–liquid–solid fluidization—a review. Chemical Engineering Science, 2007, 62(1-2): 2-27.
Yekeen, N., Manan, M. A., Idris, A. K., et al. A comprehensive review of experimental studies of nanoparticles-stabilized foam for enhanced oil recovery. Journal of Petroleum Science and Engineering, 2018, 164: 43-74.
Yekeen, N., Padmanabhan, E., Idris, A. K. Synergistic effects of nanoparticles and surfactants on n-decane-water interfacial tension and bulk foam stability at high temperature. Journal of Petroleum Science and Engineering, 2019, 179: 814-830.
Yu, W., Kanj, M. Y. Review of foam stability in porous media: The effect of coarsening. Journal of Petroleum Science and Engineering, 2022, 208: 109698.
Zeng, X., Lan, X., Zhu, H., et al. A review on bubble stability in fresh concrete: Mechanisms and main factors. Materials, 2020, 13(8): 1820.
Zhan, F., Youssef, M., Li, J., et al. Beyond particle stabilization of emulsions and foams: Proteins in liquid-liquid and liquid-gas interfaces. Advances in Colloid and Interface Science, 2022, 308: 102743.
Zhang, X., Ye, Q., Deng, J., et al. Experimental study and mechanism analysis of spontaneous imbibition of surfactants in tight oil sandstone. Capillarity, 2023, 7(1): 1-12.
Zhang, Y., Liu, Q., Ye, H., et al. Nanoparticles as foam stabilizer: Mechanism, control parameters and application in foam flooding for enhanced oil recovery. Journal of Petroleum Science and Engineering, 2021, 202: 108561.
Zhang, Y., Wang, Y., Xue, F., et al. CO2 foam flooding for improved oil recovery: Reservoir simulation models and influencing factors. Journal of Petroleum Science and Engineering, 2015, 133: 838-850.
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.