Evaluation of bedding effect on the bursting liability of coal and coal-rock combination under different bedding dip angles
Abstract view|0|times PDF download|0|times
Abstract
Rock bursts pose a significant risk to coal mine operation safety. Thus, accurately discriminating coal bursting liabilities is crucial for predicting and preventing rock burst events. To better understand the effects of a varying bedding angle on the crack propagation rule, failure mode and bursting liability level of coal and coal-rock combinations, we propose an optimized machine learning-based model. Additionally, uniaxial compressive tests are conducted using PFC3D software on samples with different bedding angles. The results indicate that, among the nine light gradient boosting machine discriminant models constructed using three data preprocessing methods and three parameter optimization algorithms, the optimal model is identified as the particle swarm optimization-light gradient boosting machine discriminant model based on Z-score standardization method, which exhibits the best stability and has a F1-score of 93.6%. Bedding has a significant impact on the failure modes of two kinds of samples, resulting in an evident bedding effect on their bursting liability. The uniaxial compression strength and bursting energy index of both samples show a reduction-rising trend with an increasing bedding dip angle. However, the bursting liability level of these samples is not affected by 0◦ or 90◦ bedding dip angle. Therefore, when assessing the bursting liability of samples, the influence of coal seam bedding and its dip angles should be thoroughly considered.
Document Type: Original article
Cited as: Wang, C., Liu, Y., Song, D., Xu, J., Wang, Q., Zhang, S. Evaluation of bedding effect on the bursting liability of coal and coal-rock combination under different bedding dip angles. Advances in Geo-Energy Research, 2024, 11(1): 29-40. https://doi.org/10.46690/ager.2024.01.04
Keywords
Full Text:
PDFReferences
Ali, M., Khan, N., Gao, Q., et.al. Prediction of coal dilatancy point using acoustic emission characteristics: Insight experimental and artificial intelligence approaches. Mathematics, 2023, 11(6): 1305.
Bentejac, C., Csorgo, A., Martinez-Munoz, G. A comparative analysis of gradient boosting algorithms. Artificial Intelligence Review, 2020, 54(2): 1937-1967.
Bidgoli, M., Zhao, Z., Jing, L. Numerical evaluation of strength and deformability of fractured rocks. Journal of Rock Mechanics and Geotechnical Engineering, 2013, 6: 156-164.
Chen, S., Zhao, Z., Feng, F., et al. Stress evolution of deep surrounding rock under characteristics of bi-modulus and strength drop. Journal of Central South University, 2022, 29(2): 680-692.
Chiu, C., Wang, T., Weng, M., et al. Modeling the anisotropic behavior of jointed rock mass using a modified smooth-joint model. International Journal of Rock Mechanics and Mining Sciences, 2013, 62: 14-22.
Frith, R., Reed, G., Jones, A. A causation mechanism for coal bursts during roadway development based on the major horizontal stress in coal: Very specific structural geology causing a localised loss of effective coal confinement and Newton’s second law. International Journal of Mining Science and Technology, 2020, 30(1): 39-47.
Hao, X., Yuan, L., Wang, S., et al. Study on bedding effect of bump tendency for hard coal. Coal Science and Technology, 2016, 46(5): 1-7. (in Chinese)
He, S., Shen, F., Chen, T., et al. Study on the seismic damage and dynamic support of roadway surrounding rock based on reconstructive transverse and longitudinal waves. Advances in Geo-Energy Research, 2023a, 9(3): 156-171.
He, S., Song, D., He, X., et al. Numerical modelling of rockburst mechanism in a steeply dipping coal seam. Bulletin of Engineering Geology and the Environment, 2023b, 82(7): 261.
He, S., Song, D., Li, Z., et.al. Precursor of spatio-temporal evolution law of MS and AE activities for rock burst warning in steeply inclined and extremely thick coal seams under caving mining conditions. Rock Mechanics and Rock Engineering, 2019, 52(7): 2415-2435.
Inage, S., Ohgi, S., Takahashi, Y. Proposal and validation of an optimization method using Monte Carlo method for multi-objective functions. Mathematics and Computers in Simulation, 2024, 215: 146-157.
Khan, N., Ahmad, M., Cao, K., et al. Developing a new bursting liability index based on energy evolution for coal under different loading rates. Sustainability, 2022, 14(3): 1572.
Lambert, C., Coll, C. Discrete modeling of rock joints with a smooth-joint contact model. Journal of Rock Mechanics and Geotechnical Engineering, 2014, 6(1): 1-12.
Li, Y., Wang, C., Liu, Y. Classification of coal bursting liability based on support vector machine and imbalanced sample set. Minerals, 2023, 13(1): 15.
Liu, H., Li, X., Yu, Z. Influence of hole diameter on mechanical properties and stability of granite rock surrounding tunnels. Physics of Fluids, 2023, 35(6): 064121.
Liu, X., Wang, X., Wang, E., et al. Effects of gas pressure on bursting liability of coal under uniaxial conditions. Journal of Natural Gas Science and Engineering, 2017, 39: 90-100.
Mark, C., Gauna, M. Evaluating the risk of coal bursts in underground coal mines. International Journal of Mining Science and Technology, 2016, 26(1): 47-52.
Melsom, B., Vennerod, C., de Lange, P. D., et al. Explainable artificial intelligence for credit scoring in banking. Journal of Risk, 2022, 25(2): 1-25.
Mottahedi, A., Ataei, M. Fuzzy fault tree analysis for coal burst occurrence probability in underground coal mining. Tunnelling and Underground Space Technology, 2019, 83: 165-174.
Mou, H., He, X., Song, D., et al. Response characteristics and influence mechanism of uniaxial compression mechanics and AE of coal with different joint angles. Journal of China Coal Society, 2020, 45(5): 1726-1732. (in Chinese)
Muhammad, A., Wang, E., Li, Z., et al. Investigation of the acoustic emission and fractal characteristics of coal with varying water contents during uniaxial compression failure. Scientific Reports, 2023, 13(1): 2238.
Park, B., Min, K., Thompson, N., et al. Three-dimensional bonded-particle discrete element modeling of mechanical behavior of transversely isotropic rock. International Journal of Rock Mechanics and Mining Sciences, 2018, 110: 120-132.
Park, S., Jung, S., Jung, S., et al. Sliding window-based Light-GBM model for electric load forecasting using anomaly repair. Journal of Supercomputing, 2021, 77(11): 12857-12878.
Peng, Y., Qiu, L., Zhu, Y., et al. Multi-scale multivariate detection method for the effective impact range of hydraulic fracturing in coal seam, Journal of Applied Geophysics, 2023, 215: 105124.
Potyondy, D., Cundall, P. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 2014, 41(8): 1329-1364.
Qiu, L., Zhu, Y., Liu, Q., et al. Response law and indicator selection of seismic wave velocity for coal seam outburst risk. Advances in Geo-Energy Research, 2023, 9(3): 198- 210.
Saber, M., Boulmaiz, T., Guermoui, M., et al. Examining LightGBM and CatBoost models for wadi flash flood susceptibility prediction. Geocarto International, 2021, 37(25): 7462-7487.
Sabzzadeh, I., Shourian, S. Maximizing crops yield net benefit in a groundwater-irrigated plain constrained to aquifer stable depletion using a coupled PSO-SWAT-MODFLOW hydro agronomic model. Journal of Cleaner Production, 2020, 262(1): 121349.
Sakamoto, S., Ozera, K., Barolli, A., et.al. Implementation of an intelligent hybrid simulation systems for WMNs based on particle swarm optimization and simulated annealing: Performance evaluation for different replacement methods. Soft Computing, 2019, 23(9): 3029-3035.
Vardar, O., Wei, C., Zhang, C., et al. An energy-based quantitative coal burst proneness rating system for development roadways. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2023, 9(1): 19.
Vardar, O., Zhang, C., Canbulat, I., et al. A semi-quantitative coal burst risk classification system. International Journal of Mining Science and Technology, 2018, 28(5): 721- 727.
Yang, L., Wang, X., Li, J. Energy evolution and damage characteristics of coal with different bursting liability under uniaxial compression. Coal Science and Technology, 2021, 49(6): 111-118. (in Chinese)
Yang, Z., Chen, J., Huang, T. Effect of joint sets on the strength and deformation of rock mass models. International Journal of Rock Mechanics and Mining Sciences, 1998, 35(1): 75-84.
Zhang, Q., Wang, E., Feng, X., et al. Assessment of rockburst risk in deep mining: An improved comprehensive index method. Natural Resources Research, 2021, 30(2): 1817-1834.
DOI: https://doi.org/10.46690/ager.2024.01.04
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.