Numerical simulation of ultrasonic wave propagation characteristics in water-based drilling fluid

Jifang Wan, Yanqi Zhao, Yuanhua Zhou, Jingcui Li, Shengwei Dong, Peng Sun

Abstract view|286|times       PDF download|112|times

Abstract


Ultrasonic wave propagates with strong penetration, high stability, and has non-contact nature, therefore it is widely used in the petroleum industry. As an application example, an ultrasonic flowmeter can accurately measure the annular flow rate of water-based drilling fluid. According to the outlet flow rate, it can be noticed if there is an abnormal situation in the well to avoid accidents such as well kick and blowout. However, due to the attenuation of ultrasonic wave in the drilling fluid, the relevant research results are not reliable. Herein, based on the theory of acoustics, the influences of water-based drilling fluid density, solid particle size and solid particle number on the ultrasonic attenuation characteristics under different frequencies are studied by numerical simulation. First, the propagation characteristics of ultrasonic wave in water-based drilling fluid are systematically analyzed, then the accuracy of the above results is verified by laboratory tests. The results show that the ultrasonic attenuation rate is positively correlated with the solid particle size, solid particle number and ultrasonic frequency in water-based drilling fluid, while it is negatively correlated with the density of water-based drilling fluid. Furthermore, it is established that the ultrasonic energy decreases with increasing propagation distance. The results of this study can provide a theoretical basis and practical guidance for using an ultrasonic flowmeter to accurately measure the annulus return flow rate of drilling fluid and develop an intelligent drilling system, so as to improve the efficiency of field operation and drilling success rate.

Document Type: Original article

Cited as: Wan, J., Zhao, Y., Zhou, Y., Li, J., Dong, S., Sun, P. Numerical simulation of ultrasonic wave propagation characteristics in water-based drilling fluid. Advances in Geo-Energy Research, 2024, 13(1): 69-80. https://doi.org/10.46690/ager.2024.07.08


Keywords


Ultrasonic, drilling fluid, solid phase particle, propagation characteristics, numerical simulation

Full Text:

PDF

References


Allegra, J. R., Hawley, S. A. Attenuation of sound in suspensions and emulsions: Theory and experiments. The Journal of the Acoustical Society of America, 1972, 51(5B): 1545-1564.

Broni-Bediako, E., Amorin, R. Experimental study on the effects of cement contamination in a water based mud. Advances in Geo-Energy Research, 2019, 3(3): 314-319.

Chen, Q., Xu, F., Cheng, L., et al. Shale ultrasonic numerical simulation based on the viscoelastic medium wave theory. Natural Gas Industry, 2019, 39(6): 63-70. (in Chinese)

Chen, Q., Yao, G., Zhu, H., et al. Numerical simulation of ultrasonic wave transmission experiments in rocks of shale gas reservoirs. Aip Advances, 2017, 7(1): 015205.

Citarella, R., Federico, L., Cicatiello, A. Modal acoustic transfer vector approach in a FEM-BEM vibro-acoustic analysis. Engineering Analysis with Boundary Elements, 2007, 31(3): 248-258.

Fan, J., Wang, F. Review of ultrasonic measurement methods for two-phase flow. Review of Scientific Instruments, 2021, 92(9): 091502.

Ge, Y. Mei, Y., Zhang, S., et al. Development of online drilling fluid property logging system. Paper SPE 208694 Presented at the IADC/SPE International Drilling Conference and Exhibition, Galveston, Texas, USA, 8-10 March, 2022.

Holt, R. M., Larsen, I., Fjær, E., et al. Comparing mechanical and ultrasonic behaviour of a brittle and a ductile shale: Relevance to prediction of borehole stability and verification of shale barriers. Journal of Petroleum Science and Engineering, 2020, 187: 106746.

Indimath, S., Bøklepp, B. R., Masøy, S. E. Performance of ˚ Doppler ultrasound for fluid influx/efflux velocity estimation from borehole fractures in water-based and oil-based muds. Geoenergy Science and Engineering, 2024, 239: 212903.

Ismail, A. R. Improve performance of water-based drilling fluids. Paper Presented at the 5th Sriwijaya International Seminar on Energy and Environmental Science and Technology, Palembang, Indonesia, 10-11 September, 2014.

Jia, H., Wang, C., Dang, R. The influence of fluid flow rate on the accuracy of ultrasonic flow measurement and its calibration. Journal of Instrumentation, 2020, 41(7): 1-8. (in Chinese)

Korlapati, N. V. S., Khan, F., Noor, Q., et al. Review and analysis of pipeline leak detection methods. Journal of pipeline science and engineering, 2022, 2(4): 100074.

Kuang, Z., Yang, W., Lin, H., et al. Research on sediment concentration measurement based on multi-frequency ultrasonic signal response. Measurement, 2023, 208: 112485.

Larrarte, F., François, P. Attenuation of an ultrasonic beam by suspended particles and range of acoustic flow meters in sewer networks. Water Science and Technology, 2012, 65(3): 478-483.

Leśniak, G., Brunner, J., Daniel, et al. Application of longreach directional drilling boreholes for gas drainage of adjacent seams in coal mines with severe geological conditions. International Journal of Coal Science & Technology, 2022, 9(1): 88.

Li, J., Wan, J., Wang, T., et al. Leakage simulation and acoustic characteristics based on acoustic logging by ultrasonic detection. Advances in Geo-Energy Research, 2022a, 6(3): 181-191.

Li, X., Xue, Y., Du, H., et al. Investigation on leakage detection and localization in gas-liquid stratified flow pipelines based on acoustic method. Journal of Pipeline Science and Engineering, 2022b, 2(4): 100089.

Li, Z., Liu, X., Wang, B., et al. Experimental study and economic evaluation of low temperature drying treatment of abandoned water-based drilling fluid. Coal Geology & Exploration, 2019, 47(4): 201-205. (in Chinese)

Liu, F., Fu, J., Zhang, Z., et al. Research of ultrasonic attenuation theory in drilling fluid. Oil Drilling & Production Technology/Shiyou Zuancai Gongyi, 2012, 34(1): 57-59. (in Chinese)

Ma, H., Zhai, C., Xu, J., et al. Effect of NMR technology based ultrasonic frequency on stimulated cracking of coal. Coal Geology & Exploration, 2019, 47(4): 38-44. (in Chinese)

Ma, T., Liu, J., Fu, J., et al. Drilling and completion technologies of coalbed methane exploitation: an overview. International Journal of Coal Science & Technology, 2022, 9(1): 68.

Matsushima, J., Suzuki, M., Kato, Y., et al. Estimation of ultrasonic scattering attenuation in partially frozen brines using magnetic resonance images. Geophysics, 2011, 76(1): T13-T25.

Moradi, M. H., Abedini, M. A combination of genetic algorithm and particle swarm optimization for optimal DG location and sizing in distribution systems. International Journal of Electrical Power & Energy Systems, 2012, 34(1): 66-74.

Morse, P. M., Ingard, K. U. Theoretical Acoustics. Princeton, USA, Princeton University Press, 1986.

Mozie, K. N. Characterization of ultrasonic waves in various drilling fluids. Norway, University of South-Eastern Norway, 2017.

Özkök, O. Modeling effects of material properties and composition on ultrasound propagation. Ankara, Middle East Technical University, 2017.

Peruga, H. Y. Ultrasonic interrogation of oil sands tailings during sedimentation. Ottawa, Carleton University, 2021.

Peters, F., Petit, L. Propagation of ultrasound waves in concentrated suspensions. Acta Acustica United with Acustica, 2000, 86(5): 838-846.

Poelma, C. Measurement in opaque flows: A review of measurement techniques for dispersed multiphase flows. Acta Mechanica, 2020, 231(6): 2089-2111.

Seldis, T., Pecorari, C. Scattering-induced attenuation of an ultrasonic beam in austenitic steel. The Journal of the Acoustical Society of America, 2000, 108(2): 580-587.

Setia, G., Mallick, S. S., Pan, R., et al. Modeling minimum transport boundary for fluidized dense-phase pneumatic conveying systems. Powder Technology, 2015, 277: 244-251.

Shahzamanian, M., Lin, M., Kaina, T., et al. Systematic literature review of the application of extended finite element method in failure prediction of pipelines. Journal of Pipeline Science and Engineering, 2021, 1(2): 241-251.

Sheen, S. H., Reimann, K. J., Lawrence, W. P., et al. Ultrasonic techniques for measurement of coal slurry viscosity. Paper Presented at IEEE 1988 Ultrasonics Symposium Proceedings, Chicago, Illinois, 2-5 October, 1988.

Sojahrood, A. J., Li, Q., Haghi, H., et al. Investigation of the nonlinear propagation of ultrasound through a bubbly medium including multiple scattering and bubble-bubble interaction: Theory and experiment. Paper Presented at 2017 IEEE International Ultrasonics Symposium (IUS), Washington, USA, 6-9 September, 2017.

Wang, Z., Zheng, Y. Critical flow velocity phenomenon in erosion-corrosion of pipelines: Determination methods, mechanisms and applications. Journal of Pipeline Science and Engineering, 2021, 1(1): 63-73.

Xia, L., Yw, Y., Wang, X. The Application of ultrasonic guided waves in the furnace tube inspection. Paper V007T07A003 Presented at ASME 2013 Pressure Vessels and Piping Conference, Paris, France, 14-18 July, 2013.

Yasui, K., Kozuka, T., Tuziuti, T., et al. FEM calculation of an acoustic field in a sonochemical reactor. Ultrasonics Sonochemistry, 2007, 14(5): 605-614.

Zhang, S., Qin, L., Li, X., et al. Propagation of Rayleigh waves on curved surfaces. Wave Motion, 2020, 94: 102517.

Zhu, J., Chen, M., Wang, L., et al. Characterization of 10 nm-10 µm coal dust particles generated by simulated different cutting and drilling parameters: Mass concentration distribution, number concentration distribution, and fractal dimension. International Journal of Coal Science & Technology, 2023, 10(1): 89.




DOI: https://doi.org/10.46690/ager.2024.07.08

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 The Author(s)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright ©2018. All Rights Reserved